Features
- Solid wrought iron arched face and double doors
- Unique lattice design and decorative keystone
- High efficiency and low emissions are achieved through a NON-CATALYTIC HIGH TECH design - You never have to replace a catalytic combustor to achieve a clean burn
- Uses outside or inside air combustion.
- Full refractory brick liner
- Four stainless steel secondary air tubes
- Firebox aerodynamics allow you to open the door without drawing smoke into the room.
- Heat radiating high temperature ceramic glass.
- Pre-installed, automatic, variable speed blower switch
- Heavy duty mig welded construction
- Safety tested and listed to Standards in Canada and the United States: ULC S610, ULC S627, UL 127 for zero clearance fireplaces and to S639 for solid fuel burning masonry fireplaces
- Cast iron grate with self-closing ash dump
- Large capacity ash pan with lid and dual carrying handles
- Easy, single lever combustion control
- President's Limited Lifetime Warranty
Accessories
- Blower kit
- Wall thermostat
- Motorized thermostat for automatic regulation of burn rate
- Central heating system
- Outside combustion air kit
|
Shown complete with wrought iron arched face
and double doors
Napoleon's rustic wrought iron elegance
takes the NZ26 fireplace to a new level
Clean and easy ash removal with the
convenient double door pan access
Specifications
Owners Manual |
| Specifications |
NZ26-WI |
| Emissions |
5.4 |
| Size |
38 1/4W x 39 1/2H x 25 1/2D |
| Firebox chamber |
22W x 10H x 14D |
| Door size |
27 1/4W x 19 3/4H |
| Weight without bricks |
310 LBS |
| Weight of bricks |
132 LBS |
| Appox. area heated* |
1,000-2,000 |
| Heat Output BTU/hr |
11,500 - 27,400** |
Heat output BTU/hr (high burn) |
70,000** |
| Burn time (low fire) |
9 hours |
| Catalytic combustor |
no |
| Mobile home approved |
no |
| R2000 approved |
yes |
| Max log size |
18" |
| Outside combustion air |
yes |
| Flue diameter |
6" |
| Flue size-prefabricated |
6" |
*Figures may vary with individual conditions
**Wolf Steel Ltd own test showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood.
Requires 6"clearance to combustibles on the sides.
CERTIFIED FOR EMISSIONS TO EPA PHASE 2 1990 AND DEQ 1988 STANDARDS |
| |
Retail |
Our Price |
| Wrought Iron Fireplace |
$4,099 |
$3,279 |
| Blower Kit |
$174 |
$139 |
|
