Napoleon - NZ26

Napoleon NZ26

Designed for your home!

The NZ26 Prestige® can be installed as a zero clearance or masonry fireplace. For your convenience it may be utilized for zone or multi-room heating and may even be connected to your central heating duct system. Heat output may be conveniently controlled with a wall thermostat. Clean burn is achieved with Napoleon's non-catalytic woodburning technology.

Features

High efficiency and low emissions are achieved through a NON-CATALYTIC HIGH TECH design - You never have to replace a catalytic combustor to achieve a clean burn
Uses outside or inside air combustion.
Full refractory brick liner
Four stainless steel secondary air tubes
Firebox aerodynamics allow you to open the door without drawing smoke into the room.
Heat radiating high temperature ceramic glass.
Pre-installed, automatic, variable speed blower switch
Heavy duty mig welded construction
Safety tested and listed to Standards in Canada and the United States: ULC S610, ULC S627, UL 127 for zero clearance fireplaces and to S639 for solid fuel burning masonry fireplaces
Cast iron grate with self-closing ash dump
Large capacity ash pan with lid and dual carrying handles
Easy, single lever combustion control
President's Limited Lifetime Warranty

Shown with webbed arched 24 karat
gold plated door and louvres

Classic arched 24 karat gold plated
door and louvres

Accessories

Variable speed control
Blower kit
Wall thermostat
Motorized thermostat for automatic regulation of burn rate
Black, 24 Karat gold plated, or polished brass louvres 24karat gold plated door
Central heating system
Outside combustion air kit
Arched door and webbed arched door in 24 Karat gold plated or traditional painted black

Installation Versatility

Installs as a zero clearance fireplace with a factory-built chimney or as a masonary fireplace using an existing or new masonry chimney. For exterior wall or interior chase installations

Four different heating usage options:

Standard installation heats through natural convection
Gravity, hot air vent system to heat adjoining rooms
Central system with thermostatic control for multi room heating
Thermostatically controlled system connects to existing duck work

Note: Masonry remote venting options come off the side instead of the top

NZ26 Zero Clearance Fireplace	Retail	Our Price
Fireplace	$2,199	$1,759
Doors (must add one)
Webbed Arched Door - Black	$341	$273
Webbed Arched Door - Gold	$683	$547
Classic Arched Door - Black	$313	$250
Classic Arched Door - Gold	$654	$524
Louver Kits - Upper and Lower (must add one)
Louvre Kit - black	$206	$165
Louvre Kit - polished brass	$206	$165
Louvre Kit - 24k gold plated	$283	$226
Options
Blower Kit	$174	$139
Thermostatic Air Damper Control: Includes draft damper motor assy, 24 v transformer, 24 v wall thermostat	$206	$165
Gravity Hot Air Vent: Includes 5" long flex. insul. alum. air vent, radiation shield, 13" x 13" polished brass grill, manual damper assy.	$185	$148
Central Heating System: Includes blower w/mounting clamps & bracket, automatic damper assy., wall mounting bracket for variable speed switch, 120v wall thermostat, hardware	$927	$741
Cast Iron Surround Kit - painted black	$411	$328
Outside Air Kit: Includes 4' insulated flexpipe (4" dia.) with through the wall vent	$71	$57
Hot air distribution kit (for air distribution only from the base of the fireplace	$223	$173
Extension kit, 5 ft. flex vent for hot air dist. kit	$32	$26
Central Heating blower only	$512	$409
8" Coupler	$12	$12
5' x 8" dia. long flexible insul. alum. air vent (for gravity hot air vent)	$75	$60
10' x 8" dia. flex. alum. air vent (for central heating systems)	$79	$64
Flexible vent support bracket (for central heating systems)	$11	$9
Flue tile support (must be used with masonry installations)	$61	$49
Hot air vent louvres (brass only)	$185	$148

Specifications	NZ26
Emissions (EPA certified)	5.4 g./hr.
Outside dimensions (WHD)	42 1/4 x 44 1/2 x 25 1/2 inches (incl standoffs)
Firebox chamber (WHD)	22 x 10 x 13 inches
Weight	326 lbs
Max log size	18 inches
Approx area heated*	2,000 sq. ft.
Heat output (high burn)**	60,000 BTU/hr
Burn time (low fire)*	8 hrs
Max. log size	18"
Mobile home approved	Yes in USA
R-2000 approved	Yes in Canada
Outside combustion air	Yes
Flue Size, minimum	6 inches
Clearance to combustibles:	"0" to stand offs - top, rear and sides

*Figures may vary with individual conditions. Please consult your specialty dealer.

** Wolf Steel Ltd. test showing BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood